Problemas al quemar imagen SVCD CUE/BIN con CDRDAO y CDRECORD

Carlos Moyano Cubillos cmcglnx en gmail.com
Sab Feb 10 16:44:18 CLST 2007


Hola amigos de la lista

le escribo ya que nesecito su ayuda nuevamente.

tengo ploblemas al quemar un imagen bin/cue de SVCD creada con
vcdxbuild (tambien he probado con vcdimager),

he probado con crrdao y cdrecord y ambos fallan en lo mismo me parece.

aca esta la orden y la salida

con cdrdao:
*************************************************************

~ $ cdrdao write --device /dev/cdrw  "videocd.cue"

Cdrdao version 1.2.1 - (C) Andreas Mueller <andreas en daneb.de>
  SCSI interface library - (C) Joerg Schilling
  Paranoia DAE library - (C) Monty

Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.

Using libscg version 'schily-0.8'

/dev/cdrw: HL-DT-ST RW/DVD GCC-4243N    Rev: 1.07
Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000)

Starting write at speed 24...
Pausing 10 seconds - hit CTRL-C to abort.
Process can be aborted with QUIT signal (usually CTRL-\).
Turning BURN-Proof on
Executing power calibration...
Power calibration successful.
?: Success.  : scsi sendcmd: no error
CDB:  2A 00 FF FF FF 6A 00 00 1A 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 60736
cmd finished after 0.001s timeout 180s
ERROR: Write data failed.
ERROR: Writing failed.

*************************************************************

con cdrecord:
*************************************************************

~ $ cdrecord -v gracetime=2 dev=/dev/cdrw speed=24 -dao
driveropts=burnfree cuefile=videocd.cue -eject

Cdrecord-ProDVD-Clone 2.01.01a10 (i686-pc-linux-gnu) Copyright (C)
1995-2006 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '/dev/cdrw'
devname: '/dev/cdrw'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
SCSI buffer size: 64512
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identifikation : 'RW/DVD GCC-4243N'
Revision       : '1.07'
Device seems to be: Generic mmc2 DVD-ROM.
Current: CD-R
Profile: DVD-ROM
Profile: CD-ROM
Profile: CD-R (current)
Profile: CD-RW
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1601712 = 1564 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data     1 MB
Track 02: data   644 MB
Total size:      645 MB (63:59.62) = 287972 sectors
Lout start:      646 MB (64:01/47) = 287972 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, low Beta category (A-) (2)
  ATIP start of lead in:  -11535 (97:28/15)
  ATIP start of lead out: 359847 (79:59/72)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 7
Manufacturer: GIGASTORAGE CORPORATION
Blocks total: 359847 Blocks current: 359847 Blocks remaining: 71875
Starting to write CD/DVD at speed 24 in real SAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
Writing pregap for track 1 at -150
cdrecord: Success. write_g1: scsi sendcmd: no error
CDB:  2A 00 FF FF FF 6A 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63504
cmd finished after 0.001s timeout 200s
write track pad data: error after 0 bytes
BFree: 1564 K BSize: 1564 K
Starting new track at sector: 0
Track 01:    0 of    1 MB written.cdrecord: Success. write_g1: scsi
sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63504
cmd finished after 0.001s timeout 200s

write track data: error after 0 bytes
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
Writing  time:   10.168s
Average write speed 766.4x.
Fixating...
Fixating time:    0.002s
cdrecord: fifo had 64 puts and 1 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.


*************************************************************



bueno eso es, no se como solucionarlo.

nunca habia intentado quemar una imagen bin/cue, solo iso y  con estas
nunca tuve problemas


que utilizan UDs para generar las imagenes de SVCDs?? con que las
queman?? ya he aprendido a transcodear mis avi a mpg para vcds pero
aun no logro grabar la imagen en un CD.

tambien probe convertir las imagenes bin a iso con bchunk y bin2iso,
pero ambos me generan dos isos de las cuales una pesa casi nada y la
otra lo ke deberia, pero esta ultima no la puedo quemar ya que me dice
que el formato es incorrecto, incluso trate con cdemu y al montar la
imagen bin, me da error.

supongo que el que me genere dos imagenes tiene que ver con que sea un
vcd, imagino que me separa track (audio y video). El svcd solo
contiene un mpg...

he aqui el archivo .cue:
****************************************
FILE "videocd.bin" BINARY
  TRACK 01 MODE2/2352
    FLAGS DCP
    INDEX 01 00:00:00
  TRACK 02 MODE2/2352
    FLAGS DCP
    INDEX 00 00:04:00
    INDEX 01 00:06:00
****************************************


de antemano les agradesco su ayuda


adios.

saludos a todos
-- 
C.M.C.



Más información sobre la lista de distribución Linux