Re: USB Lento. ¿¿Por que?? ni idea....
Isaac Smith
xsober2003 en yahoo.es
Jue Oct 6 23:47:12 CLT 2005
Hola,
revise mi log y veo cosas un tanto extrañas al
insertar mi pen. Ni idea que sig muchas de ellas, de
primera las entiendo, pero luego salesn cosas que no.
esto es lo que registra mi loger al momento de
insertar el pen en cualquier puerto usb:
usb 1-2: new high speed USB device using ehci_hcd and
address 3
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before
scanning
Vendor: Udisk Model: PDU01_128 2.0 Rev: 0.00
Type: Direct-Access ANSI SCSI
revision: 02
SCSI device sda: 247296 512-byte hdwr sectors (127 MB)
sda: Write Protect is off
sda: Mode Sense: 00 00 00 00
sda: assuming drive cache: write through
ioctl_internal_command: <0 0 0 0> return code =
8000002
: Current: sense key=0x0
ASC=0x0 ASCQ=0x0
SCSI device sda: 247296 512-byte hdwr sectors (127 MB)
sda: Write Protect is off
sda: Mode Sense: 00 00 00 00
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi0, channel 0,
id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0,
lun 0, type 0
usb-storage: device scan complete
scsi.agent[5653]: disk at
/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/host0/target0:0:0/0:0:0:0
ioctl_internal_command: <0 0 0 0> return code =
8000002
: Current: sense key=0x0
ASC=0x0 ASCQ=0x0
ioctl_internal_command: <0 0 0 0> return code =
8000002
: Current: sense key=0x0
ASC=0x0 ASCQ=0x0
ioctl_internal_command: <0 0 0 0> return code =
8000002
Current: sense key=0x0
ASC=0x0 ASCQ=0x0
ioctl_internal_command: <0 0 0 0> return code =
8000002
: Current: sense key=0x0
ASC=0x0 ASCQ=0x0
fstab-sync[5721]: added mount point /media/TOOLPEN for
/dev/sda1
ioctl_internal_command: <0 0 0 0> return code =
8000002
: Current: sense key=0x0
ASC=0x0 ASCQ=0x0
--- Isaac Smith <xsober2003 en yahoo.es> escribió:
> From Isaac Smith Fri Oct 7 00:52:39 2005
> X-Apparently-To: xsober2003 en yahoo.es via
> 217.12.13.49; Thu, 06 Oct 2005 19:22:07 -0700
> X-Originating-IP: [200.1.19.8]
> Return-Path: <linux-bounces en listas.inf.utfsm.cl>
> Authentication-Results: mta164.mail.mud.yahoo.com
> from=listas.inf.utfsm.cl; domainkeys=fail (bad
> syntax)
> Received: from 200.1.19.8 (EHLO
> listas.inf.utfsm.cl) (200.1.19.8)
> by mta164.mail.mud.yahoo.com with SMTP; Thu, 06
> Oct 2005 19:22:06 -0700
> Received: from listas.inf.utfsm.cl
> (localhost.localdomain [127.0.0.1])
> by listas.inf.utfsm.cl (8.13.1/8.13.1) with ESMTP
> id j971q0bK032196;
> Thu, 6 Oct 2005 21:53:13 -0400
> Received: from web86804.mail.ukl.yahoo.com
> (web86804.mail.ukl.yahoo.com
> [217.12.13.46])
> by listas.inf.utfsm.cl (8.13.1/8.13.1) with SMTP id
> j971pvq9032190
> for <linux en listas.inf.utfsm.cl>; Thu, 6 Oct 2005
> 21:51:58 -0400
> Received: (qmail 14191 invoked by uid 60001); 7 Oct
> 2005 00:52:39 -0000
> DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws;
> s=s1024; d=yahoo.es;
>
>
h=Message-ID:Received:Date:From:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding;
>
>
b=fA+Qvql0Ad3vmvNhNiZ/pztUSIiGKrr1J0LXCAgrXsiG872p8o/FrigNZBH+wk8XgWkjv0ZfxbBSJPNB2oOj+bRXWea0fw9zzoS9k1VjDZb5oShNktS0XgQ6E70Rbvu5kc/ZLye3qEygmqNb5wzIHH+f7WBREywARkDQ9AKodEU=
> ;
> Message-ID:
>
<20051007005239.14188.qmail en web86804.mail.ukl.yahoo.com>
> Received: from [201.215.154.83] by
> web86804.mail.ukl.yahoo.com via HTTP;
> Fri, 07 Oct 2005 02:52:39 CEST
> Fecha: Fri, 7 Oct 2005 02:52:39 +0200 (CEST)
> De: Isaac Smith <xsober2003 en yahoo.es>
> Para: lista linux <linux en listas.inf.utfsm.cl>
> MIME-Version: 1.0
> Content-Type: text/plain; charset=iso-8859-1
> Content-Transfer-Encoding: 8bit
> X-Greylist: Sender IP whitelisted, not delayed by
> milter-greylist-2.0b5 (listas.inf.utfsm.cl
> [127.0.0.1]); Thu, 06 Oct 2005 21:53:18 -0400 (CLT)
> X-Greylist: Delayed for 01:00:00 by
> milter-greylist-2.0b5 (listas.inf.utfsm.cl
> [200.1.19.8]); Thu, 06 Oct 2005 21:51:59 -0400
> (CLT)
> X-Virus-Scanned: ClamAV version 0.87, clamav-milter
> version 0.87 on localhost
> X-Virus-Scanned: ClamAV version 0.87, clamav-milter
> version 0.87 on localhost
> X-Virus-Status: Clean
> Asunto: Re: USB Lento. ¿¿Por que?? ni idea.
> ...
> X-BeenThere: linux en listas.inf.utfsm.cl
> X-Mailman-Version: 2.1.5
> Precedence: list
> Responder a: Discusion de Linux en Castellano
> <linux en listas.inf.utfsm.cl>
> List-Id: Discusion de Linux en Castellano
> <linux.listas.inf.utfsm.cl>
> List-Unsubscribe:
>
<https://listas.inf.utfsm.cl/mailman/listinfo/linux>,
>
>
<mailto:linux-request en listas.inf.utfsm.cl?subject=unsubscribe>
> List-Archive:
> <http://listas.inf.utfsm.cl/pipermail/linux>
> List-Post: <mailto:linux en listas.inf.utfsm.cl>
> List-Help:
>
<mailto:linux-request en listas.inf.utfsm.cl?subject=help>
> List-Subscribe:
>
<https://listas.inf.utfsm.cl/mailman/listinfo/linux>,
>
>
<mailto:linux-request en listas.inf.utfsm.cl?subject=subscribe>
> Sender: linux-bounces en listas.inf.utfsm.cl
> Errors-To: linux-bounces en listas.inf.utfsm.cl
> Content-Length: 732
>
> Sip, es el mismo pc, hp dv1117.
>
> A todo esto no creo ke se deba a algun porblema con
> mi
> pen, ya que tengo dos y con los dos pasa lo mismo,
> es
> mas con algun pen de un amigo me sucedio lo mismo.
>
> aca esta la salida de lsusb y lsusb -t
>
> # lsusb
> Bus 004 Device 001: ID 0000:0000
> Bus 003 Device 002: ID 1267:0201 Logic3 /
> SpectraVideo
> plc
> Bus 003 Device 001: ID 0000:0000
> Bus 002 Device 001: ID 0000:0000
> Bus 001 Device 003: ID 0457:0151 Silicon Integrated
> Systems Corp.
> Bus 001 Device 001: ID 0000:0000
>
>
> # lsusb -t
> Bus# 4
> `-Dev# 1 Vendor 0x0000 Product 0x0000
> Bus# 3
> `-Dev# 1 Vendor 0x0000 Product 0x0000
> `-Dev# 2 Vendor 0x1267 Product 0x0201
> Bus# 2
> `-Dev# 1 Vendor 0x0000 Product 0x0000
> Bus# 1
> `-Dev# 1 Vendor 0x0000 Product 0x0000
> `-Dev# 3 Vendor 0x0457 Product 0x0151
>
>
>
>
>
> Isaac
> > Smith wrote:
> >
> > Hola,
> >
> > > tengo la sgte duda, en mi linux la transferencia
> > de archivos al
> > > dispositivos USB es sumamente lenta, esto no
> > ocurre asi en winxp
> >
> > Es el mismo PC, verdad?
> >
> > > # lspci -v | grep USB
> > >
> > > 0000:00:1d.0 USB Controller: Intel Corporation
> > > 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI
> > > Controller #1 (rev 03) (prog-if 00 [UHCI])
> > > 0000:00:1d.1 USB Controller: Intel Corporation
> > > 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI
> > > Controller #2 (rev 03) (prog-if 00 [UHCI])
> > > 0000:00:1d.2 USB Controller: Intel Corporation
> > > 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI
> > > Controller #3 (rev 03) (prog-if 00 [UHCI])
> > > 0000:00:1d.7 USB Controller: Intel Corporation
> > > 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller
> > (rev
> > > 03) (prog-if 20 [EHCI])
> >
> > Hmm, que dicen lsusb y lsusb -t?
> >
> > --
>
>
> C.M.C.
>
>
>
> ______________________________________________
> Renovamos el Correo Yahoo!
> Nuevos servicios, más seguridad
> http://correo.yahoo.es
>
C.M.C.
______________________________________________
Renovamos el Correo Yahoo!
Nuevos servicios, más seguridad
http://correo.yahoo.es
Más información sobre la lista de distribución Linux