Problemas con velocidad de descargas

Jue Jun 22 10:16:51 CLT 2006

FERNANDO VILLARROEL wrote:
> 
> Todas las tarjetas están en autoselect, prueba
> forzándolas. Es muy
> posible que sea eso.
> 
> Hola gracias, como las fuerzo?
> 
> 
>>> OpenBSD 3.8 (GENERIC.RAID) #0: Wed Jun 21 06:26:47
>> CLT
>>> 2006
>>>    
>>>
> root en paranoid.callme.cl:/usr/src/sys/arch/i386/compile/GENERIC.RAID
>>> cpu0: Intel(R) Pentium(R) 4 CPU 3.06GHz
>>> ("GenuineIntel" 686-class) 3.07 GHz
>>> cpu0:
>>>
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,TM2,CNXT-ID
>>> real mem  = 1063309312 (1038388K)
>>> avail mem = 963190784 (940616K)
>>> using 4278 buffers containing 53268480 bytes
>> (52020K)
>>> of memory
>>> mainbus0 (root)
>>> bios0 at mainbus0: AT/286+(00) BIOS, date 12/05/05
>>> apm0 at bios0: Power Management spec V1.2
>>> apm0: AC on, battery charge unknown, estimated
>> 0:00
>>> hours
>>> apm0: flags 30102 dobusy 0 doidle 1
>>> pcibios at bios0 function 0x1a not configured
>>> bios0: ROM list: 0xc0000/0xae00! 0xcb000/0x800
>>> 0xcb800/0x1800 0xcd000/0x1000
>>> cpu0 at mainbus0
>>> pci0 at mainbus0 bus 0: configuration mode 1 (no
>> bios)
>>> pchb0 at pci0 dev 0 function 0 "Intel 82945GP" rev
>>> 0x02
>>> vga1 at pci0 dev 2 function 0 vendor "Intel",
>> unknown
>>> product 0x2772 rev 0x02: aperture at 0x50100000,
>> size
>>> 0x8000000
>>> wsdisplay0 at vga1 mux 1: console (80x25, vt100
>>> emulation)
>>> wsdisplay0: screen 1-5 added (80x25, vt100
>> emulation)
>>> "Intel 82801GB HD Audio" rev 0x01 at pci0 dev 27
>>> function 0 not configured
>>> ppb0 at pci0 dev 28 function 0 "Intel 82801GB
>> PCIE"
>>> rev 0x01
>>> pci1 at ppb0 bus 1
>>> ppb1 at pci0 dev 28 function 2 "Intel 82801GB
>> PCIE"
>>> rev 0x01
>>> pci2 at ppb1 bus 2
>>> ppb2 at pci0 dev 28 function 3 "Intel 82801GB
>> PCIE"
>>> rev 0x01
>>> pci3 at ppb2 bus 3
>>> ppb3 at pci0 dev 28 function 4 vendor "Intel",
>> unknown
>>> product 0x27e0 rev 0x01
>>> pci4 at ppb3 bus 4
>>> ppb4 at pci0 dev 28 function 5 vendor "Intel",
>> unknown
>>> product 0x27e2 rev 0x01
>>> pci5 at ppb4 bus 5
>>> uhci0 at pci0 dev 29 function 0 "Intel 82801GB
>> USB"
>>> rev 0x01: irq 10
>>> usb0 at uhci0: USB revision 1.0
>>> uhub0 at usb0
>>> uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
>>> uhub0: 2 ports with 2 removable, self powered
>>> uhci1 at pci0 dev 29 function 1 "Intel 82801GB
>> USB"
>>> rev 0x01: irq 11
>>> usb1 at uhci1: USB revision 1.0
>>> uhub1 at usb1
>>> uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
>>> uhub1: 2 ports with 2 removable, self powered
>>> uhci2 at pci0 dev 29 function 2 "Intel 82801GB
>> USB"
>>> rev 0x01: irq 11
>>> usb2 at uhci2: USB revision 1.0
>>> uhub2 at usb2
>>> uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
>>> uhub2: 2 ports with 2 removable, self powered
>>> uhci3 at pci0 dev 29 function 3 "Intel 82801GB
>> USB"
>>> rev 0x01: irq 11
>>> usb3 at uhci3: USB revision 1.0
>>> uhub3 at usb3
>>> uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
>>> uhub3: 2 ports with 2 removable, self powered
>>> ehci0 at pci0 dev 29 function 7 "Intel 82801GB
>> USB"
>>> rev 0x01: irq 10
>>> usb4 at ehci0: USB revision 2.0
>>> uhub4 at usb4
>>> uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
>>> ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP"
>> rev
>>> 0xe1
>>> pci6 at ppb5 bus 6
>>> skc0 at pci6 dev 0 function 0 "3Com 3c940" rev
>> 0x10:
>>> irq 11
>>> skc0: Marvell Yukon (0x1)
>>> sk0 at skc0 port A: address 00:0a:5e:24:25:ae
>>> eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY,
>> rev.
>>> 3
>>> "Texas Instruments TSB43AB23 FireWire" rev 0x00 at
>>> pci6 dev 5 function 0 not configured
>>> fxp0 at pci6 dev 8 function 0 "Intel 82801GB LAN"
>> rev
>>> 0x01: irq 11, address 00:16:76:44:88:27
>>> inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
>>> pcib0 at pci0 dev 31 function 0 "Intel 82801GB
>> LPC"
>>> rev 0x01
>>> pciide0 at pci0 dev 31 function 1 "Intel 82801GB
>> IDE"
>>> rev 0x01: DMA, channel 0 configured to
>> compatibility,
>>> channel 1 configured to compatibility
>>> atapiscsi0 at pciide0 channel 0 drive 0
>>> scsibus0 at atapiscsi0: 2 targets
>>> cd0 at scsibus0 targ 0 lun 0: <SONY, CD-ROM
>> CDU5225,
>>> NYS2> SCSI0 5/cdrom removable
>>> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode
>> 2
>>> pciide0: channel 1 ignored (disabled)
>>> pciide1 at pci0 dev 31 function 2 "Intel 82801GB
>> SATA"
>>> rev 0x01: DMA, channel 0 configured to native-PCI,
>>> channel 1 configured to native-PCI
>>> pciide1: using irq 11 for native-PCI interrupt
>>> wd0 at pciide1 channel 0 drive 0: <ST3808110AS>
>>> wd0: 16-sector PIO, LBA48, 76319MB, 156301488
>> sectors
>>> wd1 at pciide1 channel 0 drive 1: <ST3808110AS>
>>> wd1: 16-sector PIO, LBA48, 76319MB, 156301488
>> sectors
>>> wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode
>> 5
>>> wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode
>> 5
>>> "Intel 82801GB SMBus" rev 0x01 at pci0 dev 31
>> function
>>> 3 not configured
>>> isa0 at pcib0
>>> isadma0 at isa0
>>> pckbc0 at isa0 port 0x60/5
>>> pckbd0 at pckbc0 (kbd slot)
>>> pckbc0: using irq 1 for kbd slot
>>> wskbd0 at pckbd0: console keyboard, using
>> wsdisplay0
>>> pcppi0 at isa0 port 0x61
>>> midi0 at pcppi0: <PC speaker>
>>> spkr0 at pcppi0
>>> sysbeep0 at pcppi0
>>> lpt0 at isa0 port 0x378/4 irq 7
>>> npx0 at isa0 port 0xf0/16: using exception 16
>>> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16
>> byte
>>> fifo
>>> biomask ff6d netmask ff6d ttymask ffef
>>> pctr: user-level cycle counter enabled
>>> Kernelized RAIDframe activated
>>> cd0(atapiscsi0:0:0): Check Condition (error 0x70)
>> on
>>> opcode 0x0
>>>     SENSE KEY: Not Ready
>>>      ASC/ASCQ: Medium Not Present
>>> raid0 (root): (RAID Level 1) total number of
>> sectors
>>> is 155248000 (75804 MB) as root
>>> dkcsum: wd0 matches BIOS drive 0x80
>>> dkcsum: wd1 matches BIOS drive 0x81
>>> rootdev=0x1300 rrootdev=0x3600 rawdev=0x3602
>>> raid0: Device already configured!
>>>
>>> Pego ademas la salida de ifconfig
>>>
>>> # ifconfig
>>> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu
>>> 33224
>>>         groups: lo
>>>         inet6 ::1 prefixlen 128
>>>         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
> === message truncated ===
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around 
> http://mail.yahoo.com 
> 

man ifconfig

-- 
Rodrigo Cuevas Araneda
Jefe de Proyectos
CISSP
Widefense - The Network Security Management Company

56.2.726.9015			| Direct
56.2.726.9001			| Fax
rcuevas en widefense.com		| E-mail
http://www.widefense.com	| URL