Problemas con velocidad de descargas

Jue Jun 22 09:51:16 CLT 2006

Todas las tarjetas están en autoselect, prueba
forzándolas. Es muy
posible que sea eso.

Hola gracias, como las fuerzo?

> > 
> > OpenBSD 3.8 (GENERIC.RAID) #0: Wed Jun 21 06:26:47
> CLT
> > 2006
> >    
> >
>
root en paranoid.callme.cl:/usr/src/sys/arch/i386/compile/GENERIC.RAID
> > cpu0: Intel(R) Pentium(R) 4 CPU 3.06GHz
> > ("GenuineIntel" 686-class) 3.07 GHz
> > cpu0:
> >
>
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,TM2,CNXT-ID
> > real mem  = 1063309312 (1038388K)
> > avail mem = 963190784 (940616K)
> > using 4278 buffers containing 53268480 bytes
> (52020K)
> > of memory
> > mainbus0 (root)
> > bios0 at mainbus0: AT/286+(00) BIOS, date 12/05/05
> > apm0 at bios0: Power Management spec V1.2
> > apm0: AC on, battery charge unknown, estimated
> 0:00
> > hours
> > apm0: flags 30102 dobusy 0 doidle 1
> > pcibios at bios0 function 0x1a not configured
> > bios0: ROM list: 0xc0000/0xae00! 0xcb000/0x800
> > 0xcb800/0x1800 0xcd000/0x1000
> > cpu0 at mainbus0
> > pci0 at mainbus0 bus 0: configuration mode 1 (no
> bios)
> > pchb0 at pci0 dev 0 function 0 "Intel 82945GP" rev
> > 0x02
> > vga1 at pci0 dev 2 function 0 vendor "Intel",
> unknown
> > product 0x2772 rev 0x02: aperture at 0x50100000,
> size
> > 0x8000000
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100
> > emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100
> emulation)
> > "Intel 82801GB HD Audio" rev 0x01 at pci0 dev 27
> > function 0 not configured
> > ppb0 at pci0 dev 28 function 0 "Intel 82801GB
> PCIE"
> > rev 0x01
> > pci1 at ppb0 bus 1
> > ppb1 at pci0 dev 28 function 2 "Intel 82801GB
> PCIE"
> > rev 0x01
> > pci2 at ppb1 bus 2
> > ppb2 at pci0 dev 28 function 3 "Intel 82801GB
> PCIE"
> > rev 0x01
> > pci3 at ppb2 bus 3
> > ppb3 at pci0 dev 28 function 4 vendor "Intel",
> unknown
> > product 0x27e0 rev 0x01
> > pci4 at ppb3 bus 4
> > ppb4 at pci0 dev 28 function 5 vendor "Intel",
> unknown
> > product 0x27e2 rev 0x01
> > pci5 at ppb4 bus 5
> > uhci0 at pci0 dev 29 function 0 "Intel 82801GB
> USB"
> > rev 0x01: irq 10
> > usb0 at uhci0: USB revision 1.0
> > uhub0 at usb0
> > uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
> > uhub0: 2 ports with 2 removable, self powered
> > uhci1 at pci0 dev 29 function 1 "Intel 82801GB
> USB"
> > rev 0x01: irq 11
> > usb1 at uhci1: USB revision 1.0
> > uhub1 at usb1
> > uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> > uhub1: 2 ports with 2 removable, self powered
> > uhci2 at pci0 dev 29 function 2 "Intel 82801GB
> USB"
> > rev 0x01: irq 11
> > usb2 at uhci2: USB revision 1.0
> > uhub2 at usb2
> > uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> > uhub2: 2 ports with 2 removable, self powered
> > uhci3 at pci0 dev 29 function 3 "Intel 82801GB
> USB"
> > rev 0x01: irq 11
> > usb3 at uhci3: USB revision 1.0
> > uhub3 at usb3
> > uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> > uhub3: 2 ports with 2 removable, self powered
> > ehci0 at pci0 dev 29 function 7 "Intel 82801GB
> USB"
> > rev 0x01: irq 10
> > usb4 at ehci0: USB revision 2.0
> > uhub4 at usb4
> > uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
> > ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP"
> rev
> > 0xe1
> > pci6 at ppb5 bus 6
> > skc0 at pci6 dev 0 function 0 "3Com 3c940" rev
> 0x10:
> > irq 11
> > skc0: Marvell Yukon (0x1)
> > sk0 at skc0 port A: address 00:0a:5e:24:25:ae
> > eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY,
> rev.
> > 3
> > "Texas Instruments TSB43AB23 FireWire" rev 0x00 at
> > pci6 dev 5 function 0 not configured
> > fxp0 at pci6 dev 8 function 0 "Intel 82801GB LAN"
> rev
> > 0x01: irq 11, address 00:16:76:44:88:27
> > inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
> > pcib0 at pci0 dev 31 function 0 "Intel 82801GB
> LPC"
> > rev 0x01
> > pciide0 at pci0 dev 31 function 1 "Intel 82801GB
> IDE"
> > rev 0x01: DMA, channel 0 configured to
> compatibility,
> > channel 1 configured to compatibility
> > atapiscsi0 at pciide0 channel 0 drive 0
> > scsibus0 at atapiscsi0: 2 targets
> > cd0 at scsibus0 targ 0 lun 0: <SONY, CD-ROM
> CDU5225,
> > NYS2> SCSI0 5/cdrom removable
> > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode
> 2
> > pciide0: channel 1 ignored (disabled)
> > pciide1 at pci0 dev 31 function 2 "Intel 82801GB
> SATA"
> > rev 0x01: DMA, channel 0 configured to native-PCI,
> > channel 1 configured to native-PCI
> > pciide1: using irq 11 for native-PCI interrupt
> > wd0 at pciide1 channel 0 drive 0: <ST3808110AS>
> > wd0: 16-sector PIO, LBA48, 76319MB, 156301488
> sectors
> > wd1 at pciide1 channel 0 drive 1: <ST3808110AS>
> > wd1: 16-sector PIO, LBA48, 76319MB, 156301488
> sectors
> > wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode
> 5
> > wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode
> 5
> > "Intel 82801GB SMBus" rev 0x01 at pci0 dev 31
> function
> > 3 not configured
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using
> wsdisplay0
> > pcppi0 at isa0 port 0x61
> > midi0 at pcppi0: <PC speaker>
> > spkr0 at pcppi0
> > sysbeep0 at pcppi0
> > lpt0 at isa0 port 0x378/4 irq 7
> > npx0 at isa0 port 0xf0/16: using exception 16
> > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16
> byte
> > fifo
> > biomask ff6d netmask ff6d ttymask ffef
> > pctr: user-level cycle counter enabled
> > Kernelized RAIDframe activated
> > cd0(atapiscsi0:0:0): Check Condition (error 0x70)
> on
> > opcode 0x0
> >     SENSE KEY: Not Ready
> >      ASC/ASCQ: Medium Not Present
> > raid0 (root): (RAID Level 1) total number of
> sectors
> > is 155248000 (75804 MB) as root
> > dkcsum: wd0 matches BIOS drive 0x80
> > dkcsum: wd1 matches BIOS drive 0x81
> > rootdev=0x1300 rrootdev=0x3600 rawdev=0x3602
> > raid0: Device already configured!
> > 
> > Pego ademas la salida de ifconfig
> > 
> > # ifconfig
> > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu
> > 33224
> >         groups: lo
> >         inet6 ::1 prefixlen 128
> >         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
> 
=== message truncated ===

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 