Problemas con velocidad de descargas

Mie Jun 21 23:44:41 CLT 2006

Hola, las pruebas las realice de dos maneras con igual
velocidad en ambos casos:

1) Conecte el servidor al switch LAN 
2) Conecte directamente al Switch WAN con IP publica

En ambos casos la velocidad fue de 1.8 MB

Adjunto la salida de dmesg:

OpenBSD 3.8 (GENERIC.RAID) #0: Wed Jun 21 06:26:47 CLT
2006

root en paranoid.callme.cl:/usr/src/sys/arch/i386/compile/GENERIC.RAID
cpu0: Intel(R) Pentium(R) 4 CPU 3.06GHz
("GenuineIntel" 686-class) 3.07 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,TM2,CNXT-ID
real mem  = 1063309312 (1038388K)
avail mem = 963190784 (940616K)
using 4278 buffers containing 53268480 bytes (52020K)
of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/05/05
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown, estimated 0:00
hours
apm0: flags 30102 dobusy 0 doidle 1
pcibios at bios0 function 0x1a not configured
bios0: ROM list: 0xc0000/0xae00! 0xcb000/0x800
0xcb800/0x1800 0xcd000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GP" rev
0x02
vga1 at pci0 dev 2 function 0 vendor "Intel", unknown
product 0x2772 rev 0x02: aperture at 0x50100000, size
0x8000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100
emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82801GB HD Audio" rev 0x01 at pci0 dev 27
function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE"
rev 0x01
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE"
rev 0x01
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE"
rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 4 vendor "Intel", unknown
product 0x27e0 rev 0x01
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 5 vendor "Intel", unknown
product 0x27e2 rev 0x01
pci5 at ppb4 bus 5
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB"
rev 0x01: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB"
rev 0x01: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB"
rev 0x01: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB"
rev 0x01: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB"
rev 0x01: irq 10
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev
0xe1
pci6 at ppb5 bus 6
skc0 at pci6 dev 0 function 0 "3Com 3c940" rev 0x10:
irq 11
skc0: Marvell Yukon (0x1)
sk0 at skc0 port A: address 00:0a:5e:24:25:ae
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev.
3
"Texas Instruments TSB43AB23 FireWire" rev 0x00 at
pci6 dev 5 function 0 not configured
fxp0 at pci6 dev 8 function 0 "Intel 82801GB LAN" rev
0x01: irq 11, address 00:16:76:44:88:27
inphy0 at fxp0 phy 1: i82562ET 10/100 PHY, rev. 0
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC"
rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE"
rev 0x01: DMA, channel 0 configured to compatibility,
channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SONY, CD-ROM CDU5225,
NYS2> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA"
rev 0x01: DMA, channel 0 configured to native-PCI,
channel 1 configured to native-PCI
pciide1: using irq 11 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <ST3808110AS>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd1 at pciide1 channel 0 drive 1: <ST3808110AS>
wd1: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
"Intel 82801GB SMBus" rev 0x01 at pci0 dev 31 function
3 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte
fifo
biomask ff6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
Kernelized RAIDframe activated
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on
opcode 0x0
    SENSE KEY: Not Ready
     ASC/ASCQ: Medium Not Present
raid0 (root): (RAID Level 1) total number of sectors
is 155248000 (75804 MB) as root
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
rootdev=0x1300 rrootdev=0x3600 rawdev=0x3602
raid0: Device already configured!

Pego ademas la salida de ifconfig

# ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu
33224
        groups: lo
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
        inet 127.0.0.1 netmask 0xff000000
sk0:
flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu
1500
        lladdr 00:0a:5e:24:25:ae
        media: Ethernet autoselect (1000baseT
half-duplex)
        status: no carrier
        inet6 fe80::20a:5eff:fe24:25ae%sk0 prefixlen
64 scopeid 0x1
        inet 10.0.0.1 netmask 0xffffff00 broadcast
10.0.0.255
fxp0:
flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu
1500
        lladdr 00:16:76:44:88:27
        groups: egress
        media: Ethernet autoselect (100baseTX
full-duplex)
        status: active
        inet6 fe80::216:76ff:fe44:8827%fxp0 prefixlen
64 scopeid 0x2
        inet 192.168.1.251 netmask 0xffffff00
broadcast 192.168.1.255
pflog0: flags=0<> mtu 33224
pfsync0: flags=0<> mtu 1348
enc0: flags=0<> mtu 1536

Atento a sus comentarios,

Fernando Villarroel N.

--- uv negativa <uv.negativa en gmail.com> wrote:

> Es algo raro a mi me funciona hasta 8MB por segundo
> en una red 100 con
> scp entre dos OpenBSD.
> que tarjetas  utiliza haga un dmesg y miramos el
> hardware a ver que
> y lo otro es como realizo esa prueba?
> 
> 
> 
> On 6/21/06, FERNANDO VILLARROEL
> <fvillarroel en yahoo.com> wrote:
> > Hola les cuento como llegue a BSD, sucede que debo
> > implementar QOS y en esta misma lista pero de
> debian
> > me recomendaron OpenBSD ya que trae incorporado al
> > kernel PF y ALTQ.
> >
> > Bueno instale OpenBSD con exito, de hecho tuve que
> > compilar el kernel para darle soporte RAID y
> despues
> > de dos dias logre configurar el Raid con OpenBSD.
> >
> > En la empresa tenemos un enlace a 100 MB, y los
> > servidores son Debian, Fedora. Bueno el cuento es
> que
> > cuando bajamos informacion la velocidad de
> > transferencia es de aprox. 6 MB.
> >
> > Mi problema es que con OpenBSD la velocidad de
> bajada
> > fue de solo aprox. 1.8 MB?
> >
> > Pense que podian ser problemas de la tarjetas y
> las
> > setee a 100baseT full-duplex, pero nada todo
> siguio
> > igual.
> >
> > Probe insrtalando Openbsd en otro equipo distinto
> con
> > obviamente distinto hardware, pero el resultado
> fue el
> > mismo 1.8 MB
> >
> > No se si es problema de OpenBSD o que?
> >
> >
> > Alguna sugerencia.
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam?  Yahoo! Mail has the best spam
> protection around
> > http://mail.yahoo.com
> >
> 

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 